VC-Dot 9 RGB 400mm Pitch 36Pcs

Description

Fully customizable and controllable via the award-winning P3 System Controller™ family and/or DMX512, it is a perfect solution for integrating LED video technology into façades, stage designs, ceilings or any other structure, indoors or out.

Mapping video onto VC-Dots goes quickly and intuitively via the P3 System Controller. No need for complex setups and time-consuming addressing. VC-Dot 9 contains nine LEDs and is available in an RGB colour mixing version.

Can assume any form of creative freedom
Individually controllable Dots
Bright at 22.5 cd per Dot (raw mode)
Maximum 36 Dots per string
Each Dot features calibrated brightness and colours
Various Dot spacings available
Customizable string length
P3 or DMX controllable
Intuitive mapping and addressing via P3 System Controller family
Efficient and long-lasting
IP67 rated for permanent outdoor or indoor use
Perfect for façade or stage integration
Supported by integrated power and data processor (P3 PowerPort 1500™) and simple cabling system

Physical

Pixel dimensions: 48 x 40 x 13 mm (1.9 x 1.6 x 0.6 in.)

Pixel dimensions with dome: 48 x 40 x 31 mm (1.9 x 1.6 x 1.3 in.)

Weight: 1.8 kg (4.0 lbs.) for 36 Dots, 400 mm (15.8 in.) spacing, with 2 m (6.6 ft.) lead-in cable and connector

Maximum number of pixels per string: 36

Standard pixel spacing (pitch): 400 mm (15.8 in.)

Minimum pixel spacing (pitch): 150 mm (5.9 in.)

Maximum pixel spacing (pitch): 2000 mm (78.8 in.)

Standard lead-in cable length: 2000 mm (78.8 in.)

Maximum lead-in cable length: 5000 mm (196.9 in.)

One pixel = one Dot

Control and Programming

Control options: Martin™ P3 System controller and/or DMX

DMX channels: 3 per RGB Dot, string or group

Control modes: Calibrated and raw

Setting and addressing: P3 System Controller or RDM-compliant controller

Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color

Color and intensity calibration: Dot-level

DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20

Optics

LED manufacturer: Cree

Minimum LED lifetime: 50 000 hours (to >70% luminous output)**

Figure obtained under manufacturer’s test conditions

Photometric Data

Light source: Nine RGB LEDs

Luminous intensity, RGB, calibrated mode: 18 cd

Luminous intensity, RGB, raw mode: 22.5 cd

Total output, RGB, calibrated mode: 55.3 lm

Red output, RGB, calibrated mode: 14.8 lm

Green output, RGB, calibrated mode: 36.9 lm

Blue output, RGB, calibrated mode: 3.6 lm

Viewing angle: 120° x 120°

Viewing angle with dome: 180° x 180°

Preliminary data, figures are approximate

Construction

Dot: Clear polycarbonate, clear silicone filled

Diffuser dome: White translucent polycarbonate

Mounting clip: White polycarbonate

Interconnecting cable: 6 x 20 AWG, black

Minimum cable bend radius: 26 mm (1.1 in.)

Protection rating: IP67

RoHS compliant

Installation

Orientation: Any

Connections

Power & data input to VC-Dot string from VC-Feeder™: Custom 8-pin connector, IP67-rated

Electrical

Operating voltage: 15 VDC

Power and data converter: Martin VC-Feeder™

Peak power consumption (at full intensity, full white): 2.75 W per Dot

Typical power consumption (with typical video content): 0.92 W per Dot

Figures for typical video content are indicative only and will vary

Thermal

Cooling: ConvectionMaximum ambient temperature (Ta max.): 55° C

Minimum ambient temperature (Ta min.): -20° C

Peak heat dissipation (calculated, at full intensity, full white): 12 BTU/hr.

Typical heat dissipation (calculated, with typical video content): 4 BTU/hr.

Figures for typical video content are indicative only and will vary