Atmospheric
Create depth, texture, and atmosphere with haze, fog, and special effects. Essential tools for enhancing lighting beams and building immersive environments.
Showing 1–12 of 43 resultsSorted by latest
-
The Look-Fan DMX is a powerful fan with 850 Watt. It can be used where fog needs to be distributed quickly and constant or where a strong wind effect is needed. The supplied hanging yoke guarantees a flexible use and can be adjusted in every needed angle The Look-Fan DMX can also be build onto a stand The fan is controllable via DMX and can be adjusted from 0 to 99%. The lead time up to maximum speed is only 2.5 seconds The DMX start-address can be adjusted and saved in the internal display The output power can also be adjusted in this display, along with start or stop functions -
The Look-Fan S is a powerful fan with 150 watts. It can be used wherever mist needs to be distributed quickly and evenly or a strong air flow is desired. The hanging bracket installed as standard ensures flexible use and can be fixed at any angle of inclination. The Look-Fan S can also be attached to a tripod and therefore used as a stand fan. The fan can be controlled via DMX and adjusted from 0 to 99%. The start-up time to maximum speed is approx. 12 seconds. The DMX start address can be set and saved via the integrated display. The Look-Fan S can also be controlled and started or stopped manually. -
The OctaJet is a new, innovative device that can replace conventional CO2jets. By using a fog fluid that dissolves extremely quickly, the use of CO2is completely eliminated. This saves both costs and unnecessary organization and logistics. The OctaJet can be used/installed in any direction vertically upwards, upside down, tilted sideways, 45°).Thus, the OctaJet is the perfect device for large events, concerts, amusement parks, etc. Wherever surprising effects are to be achieved, the OctaJet is in the right place. Product Features: Exact setting of the output time The time for the jet shot (Shot time) can be set from 100 milliseconds to 2 seconds (in 100 millisecond increments).This allows an identical time to be set for multiple units to better synchronize short shots. If the time is set to off, the fog duration can be freely determined via DMX. Setting of the output height The output height of the OctaJet is determined by means of pressure. The output height can be set in four levels. The selection of the pressure level (low, medium, high, max) determines the height of the jet shot. Touchscreen The large touchscreen with simple menu navigation allows the desired settings to be made quickly and intuitively. New control options In addition to control via DMX 512, control via Ethernet (Artnet and sACN) is also possible. Manual operation is also possible. Here, the time for the jet shot is set directly on the device. The fogging process is started by briefly pressing the start button. RDM Various information can be read via RDM. The built-in sensors for preheat, energy, heating temperature, pressure, tank level and jet time can also be read out via RDM Internal 2L tank The integrated 2L tank has several sensors that indicate the level of the tank in four steps. Internal Operating hours counter Records the running time of the pump, heating element and device. Connector for external tank If the OctaJet is installed in the truss, an external tank can be connected. Fluid The OctaJet achieves optimal results with the Jet-Fluid. CODE: LOKJCE275 Look Jet Fluid 5L -
The Cryo-Gate is a compact device that mates up to any professional fogger. It enables the user to temporarily transform their existing fogger into a low fog generator. To be used with CO2-high pressure bottles. The Cryo-Gate sits in front of the fogger‘s nozzle. A high-pressure dip-tube siphon CO2 tank connects to the unit and allows the user to add a variable amount of CO2 and air to the fog‘s output. The result is a cold fog that stays low. A tube (Ø 200 mm) can be connected to the front of the Cryo-Gate to guide the fog into the requested direction. The tube can be around ten meters long, allowing to place the machine away from the stage to avoid disturbing noise. Holes at the Cryo-Gate ease mounting it to a rack or building it into a flightcase. Product Features: Can be used with fog generators that have been already bought Ethernet, DMX 512, analogue (0 – 10 V) and manual control Several adjustments (Air, CO2- and fog output) Adjustments made via Touchscreen Compact Connector for tube CO2 high pressure bottles can be rented nearly everywhere Also available without flightcase Made in Germany -
The ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time. At the moment, the ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time. Due to its enormous power and the strong output very large halls and even stadiums can be filled with fog. The ORKA is the perfect machine for Events, Concerts, Special effects, Theme parks, large TVand Film-Studios and for Fire brigades or Disasters control examinations. The compact dimensions and the robust housing of the machine make it suitable for touring use. Product Features • Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. • Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the ORKA to be used in both small and large locations. • DMX 512 as standard The ORKA can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. If an external fan is connected to the machine it can be controlled separately via DMX as well and can be used as a wind machine. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLRplugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. • Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. • Connector for external fan An external fan with max. 800 watts can be connected to the ORKA. Fluid The following Look-fog fluids are available for the ORKA: · Quick-Fog (thick, quick disappearing fluid) · Regular-Fog (thick, long lasting fluid) · Slow-Fog (thick, extremly long lasting fluid) -
The Cobra 3.1 is a powerful fog generator, that sets new Standards concerning noise and handling. The new Touchscreen makes the handling of the Cobra 3.1 easy and intuitive. Operation via Ethernet and RDM-features allow most exible use. The machine is supplied with a duct adaptor that also functions as a protection against contact. Features •230V only • New, extremely silent nozzle with its newly developed nozzle the machine works very silently. The noise level at full output is 82.5 dBA (in comparison: the Viper 2.6 with 2600 Watt generates at full output 100.5 dBA). The nozzle can be unscrewed and cleaned as needed. • Two pumps for constant output The use of two pumps ensures a very constant fog output at any pump level. Therefore the continuous output up to 30% pump level is regulated from one pump, levels from 31% to 100% are regulated by a second, more powerful pump. • New Touchscreen All adjustments can be made easily and intuitive via the big Touchscreen with simple menu navigation. • New controls Besides the stand-alone, analogue and DMX 512 control, the machine can also be operated via Ethernet (Artnet and sACN). • RDM-capable The Cobra 3.1 is equipped with the following RDM-features: — Status: Ready, Re-heating, Error messages (E-1, E-2 etc) — DMX-Patch — Temperature: Heating element, PCB — Adjusting the Personality — General Informations about the machine Newly developed, extremely silent nozzle constant, steady Output DMX, Ethernet, RDM Made in Germany • Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 – 100%. Thus, any desired effect – from a tiny fog cloud to the thickest continuous fog – can be produced. This allows an individual adaptation to the dimensions of the room. • Adjustable Pump characteristic Depending on the use of the Cobra 3.1 and the desired effect, the user can choose between four different pump characteristics: Impulse, Extended, Flood and Continuous. The output and fogging time varies depending on the choo- sen pump characteristic. • Adjustable Performance curve For nest adjustments of the pump from 0% – 30%. In these- pump levels, the performance curve can be regulated 5% up or down, if the same output is needed at several machines or the aging process influences the output. Thus, different fog amounts can be balanced. • Internal Timer With the internal timer, the fogging time can be adjusted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated. •Working hours counter The Cobra 3.1 is equipped with a working hours counter, that saves heating and fogging durations. Liquid The following Look fog liquids are available for the Cobra 3.1: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long-lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid) -
Smaller, quieter, and capable of taking low-fog to more locations—the live event industry’s leading low-fog machine returns with its most significant upgrade in over a decade. JEM Professional Glaciator Dynamic is your complete solution for creating dense, billowy clouds of low-lying fog in any venue without the use of industrial gases or ice. Achieve lush fog on stage with longer-lasting effects. Reduce noise with near-silent operation, perfect for theatrical applications. Enjoy more room backstage with an all-new, more compact design. And tour the world with an updated universal power supply. With a full range of premium accessories, three low-fog fluid types to choose from, and streamlined user controls, you can create dramatic atmospheric effects for your production in moments. Just plug in, set the stage, and amaze. Completely self-contained low-fog system—no industrial gases or ice Closed-loop refrigeration for colder, dense, longer-lasting low-fog Ultra-quiet operation, including low ambient noise in standby Features All-in-one, self-contained solution without the need for external fans, industrial gas tanks, or ice All-new Electronic Inverter Drive for improved effects and lower ambient noise Fill your stage with low-fog thanks to continuous 80 m³ (2825 ft³) per-minute output Even smaller, compact service-friendly design: 785 x 648 x 769 mm (30.9 x 25.5 x 30.2 in.) World touring capabilities via a universal power supply that operates at 208-250 V, 50/60 Hz Onboard industry standard DMX connectivity (both 3- and 5- pin) for control and integration Intuitive user interface with Fast Access Keypad for fast, easy manipulation of low-fog output 180° Low-fog outlet engineered for a smooth, consistent low-fog field Achieve diverse effects with three premium fluid options Simple, one-touch fluid priming 5 l internal fluid reservoir provides an hour of continual consistent low-fog output -
Suitable for low lying fog machine and the vertical fog machine. -
Suitable for the Gig Haze 2100 and Venue Haze 1150W. -
-
-
